If soil test results for P are available, the optimum amount of P fertilizer to apply to a crop can be best recommended by ________
A) subtracting the available soil test P from the total P uptake for the desired yield goal
B) comparing the cost of P fertilizer to the yield responses measured in the past when P was applied to similar soils with similar soil test P levels
C) subtracting the soil test P level measured from the soil test P level considered to be on the border of "high" and "very high"
D) calculating the amount of P needed to bring the ratios of soil test P to N, P to K, and P to Mg into balance with the proper ratio for the type of soil in question
E) these days, all four of the above a done, in order, by a computer program
B
You might also like to view...
Vacuum is formed on the:
A. Intake stroke B. Compression stroke C. Power stroke D. Exhaust stroke
In a typical DC electric braking circuit, power is supplied to the braking relay by a(n) _____.
a. NOTC contact b. NCTO contact c. NOTO contact d. NCTC contact
Class MC of ASME BPVCgives requirements for _____.
a. power piping b. boilers c. metal containment for reactors d. the manufacturer's committee on vessels
When joining grooved pipe, which step is performed immediately after the housing is installed?
a. Apply lubricant to the gasket. b. Install the gasket over the pipe end. c. Center the gasket between the grooves on each pipe. d. Insert the remaining bolt and nut.