In binary systems the sign of a number is indicated by ________
A) inverting the bits if the number is negative
B) using a 0 (zero) bit in front of negative numbers
C) placing a negative sign in front of the number
D) including a sign bit before the magnitude bits
D
You might also like to view...
On a car with a MacPherson strut front suspension, a 6 degree difference in left and right SAI angles may increase what during hard acceleration?
What will be an ideal response?
The elevation at the rim of SDMH-6 is_______higher than the elevation at the rim of SDMH-4, and______higher than the elevation at the rim of SDMH-5.
Fill in the blank(s) with the appropriate word(s).
Why is a visual check of the heating strips on an electric furnace difficult to accomplish?
A) It is difficult to spot a break in a strip heater because of the small size wire used B) It is not safe to look at an operating strip heater without wearing protective radiant reflecting headgear made specifically for safe viewing C) The heaters cannot be seen without removing them from the furnace D) Electric strip heaters are complex devices
The most basic torque wrench is called the _____ torque wrench
A. deflecting beam B. dial indicating C. micrometer D. combunation