Given: Cross-classification data for the Jeffersonville Transportation Study Area Develop the family of cross-classification curves. Determine the number of trips produced (by purpose) for a traffic zone containing 500 houses with an average household income of $35,000. (Use high = $55,000; medium = $25,000; low = $15,000.)
What will be an ideal response?
From the graphs above, the following tables can be produced.
Next, develop a table to show the number of households owning x vehicles. This
can be accomplished by multiplying the values found in the table of the number of
HH per level of income and the percentage of HH owning x vehicles together.
For example:
For low income level and 0 auto ownership = (62) × 26% = 16
For medium income level and 0 auto ownership = (363) × 3% = 11
For high income level and 0 auto ownership = (75) × 0% = 0
This procedure is used to generate the following table.
The number of trips by purpose can then be calculated as follows:
HBW = (0.38 × 399) + (0.37 × 3530) + (0.18 × 1400) = 1,710
HBO = (0.34 × 399) + (0.34 × 3530) + (0.38 × 1400) = 1,868
NHB = (0.28 × 399) + (0.29 × 3530) + (0.44 × 1400) = 1,751
You might also like to view...
Why is it important that the same force be used when tightening nuts and bolts on compressors?
A) Gaskets can seat unevenly and leak. B) You may not always have Permagasket to help. C) Most compressor heads have only two bolts. D) It is easier to tighten evenly all the way around.
A SONET mux is segmented into two primary areas. One is the ________ side, the second is the ________ side
Fill in the blank(s) with correct word
For what purpose are come-alongs most often used?
A. Lifting engines. B. To apply straight line force to an object. C. Separating heads from blocks. D. Dragging engine blocks.
A discrete-time feedback system has a forward-path transfer function and a feedback-path transfer function
For what range of real values of K is this system stable?