The status operation for the SLC 500 ________
A) Stores processor configurations in specific memory locations in file 1
B) Stores data related to the operation of the processor in specific memory locations in file 2
C) Stores timer data in specific memory locations in file 4
D) Stores input and output bit information in specific memory locations in file 0
B
You might also like to view...
The ____ diagram shows the physical connections of the circuit.
a. heater b. cooler c. ladder d. wiring
Elevator and stair shafts in building cores are often constructed by using a type of _____.
a. sliding form b. climbing form c. slip form d. jack-raised form
For a circular saw, a __________ blade is superior to a standard blade because it is less prone to dulling.
A. large-toothed B. fine-toothed C. carbide-tipped D. All of the above
The factory charge in a split system, using R-22, shows 6 lb. 8 oz. in the outdoor condensing unit and 2 oz. in the evaporator. The 3/8" liquid line contains 0.48 oz. per foot and the 7/8" suction line contains 0.10 oz. per foot. The refrigerant lines are 30' long. What is the correct refrigerant charge for this system?
A. 6 lb. 10 oz. B. 6 lb. 15 oz. C. 7 lb. 7 oz. D. 7 lb. 11 oz.