You need to solve some network connection problems, but unfortunately many labels are missing from the patch panel in the telecommunications room. Briefly describe the tool you would use, and how you would use it, to trace the cables so that you can properly label both ends of each cable on the patch panel and in the work area.

What will be an ideal response?


When the time comes to trace cables, network techs turn to a device called a toner for help. Toner is the generic term for two separate devices that are used together: a tone generator and a tone probe. The tone generator connects to the cable using alligator clips, tiny hooks, or a network jack, and it sends an electrical signal along the wire at a certain frequency. The tone probe emits a sound when it is placed near a cable connected to the tone generator. These two devices are often referred to by the brand-name Fox and Hound, a popular model of toner made by the Triplett Corporation.
 
To trace a cable, connect the tone generator to the known end of the cable in question, and then position the tone probe next to the other end of each of the cables that might be the right one. The tone probe makes a sound when it's placed next to the right cable. Some toners have one tone probe that works with multiple tone generators. Each generator emits a separate frequency, and the probe sounds a different tone for each one. Even good toners are relatively inexpensive ($75); although inexpensive toners can cost less than $25, they don't tend to work well, so spending a little more is worthwhile. Just keep in mind that if you have to support a network, you'd do best to own a decent toner.
 

Computer Science & Information Technology

You might also like to view...

If a thread calls __________, then every thread waiting for the object becomes eligible to acquire the lock.

a. signalEach b. signalAll c. signal d. signalMethods

Computer Science & Information Technology

On the Spot Healing Brush Tool, the Type setting ____ option uses the pixels just outside the edges of the brush area to heal the brush area.

a. Proximity Match b. Outside Edges c. Create Texture d. Nearby Pixels

Computer Science & Information Technology

Only that employee whose job function depends on knowing the information is provided access. This is called ____.

A. Due care B. Separation of duties C. Risk assessment D. Need to know

Computer Science & Information Technology

A(n) _________________________ is a questionnaire that attempts to measure users' reactions (positive or negative) to the support services they receive.

Fill in the blank(s) with the appropriate word(s).

Computer Science & Information Technology