What is destructive testing of a weld?
What will be an ideal response?
Destructive testing of a weld is where a weld is destroyed to test its performance. It is and has been used as a means of verifying a welder's quality of welds.
You might also like to view...
Paula has 550 acres of rice. She used a 16-foot harrow to help level the field traveling at 4.2 mile per hour. She used 0.95 gallon of diesel fuel per acre at $3.46 per gallon.
What will be an ideal response?
What are three factors that should be considered when planning a vegetable garden?
What will be an ideal response?
The wet coil static pressure drop is:
A) Can only be determined when the coil is submerged in water. B) Lower than the dry coil static pressure drop. C) Higher than the dry coil static pressure drop. D) About the same as the dry coil static pressure drop.
If a thermostat, high-pressure switch, and oil pressure switch are connected in series with a compressor motor, and the oil pressure switch is opened because of low oil pressure, the compressor motor will ________
A) will stop running because current flow will be zero B) will not be affected because no other loads are connected to it in series C) still run because two of the other switches are still closed