Technician A says when measuring vertical ball joint wear, pry upward with a steel bar under the front tire and observe the dial indicator reading. Technician B says when measuring lateral ball joint wear, grasp the tire at the top and bottom and try to force the tire inward and outward and observe the dial indicator reading. Who is correct?

A. A only
B. B only
C. Both A and B
D. Neither A nor B


Answer: C

Trades & Technology

You might also like to view...

A vehicle is being checked for a no-crank condition. A voltmeter placed across the contacts of the starter solenoid indicates 12 volts when the ignition is turned to the "start" position. A distinct "click" noise is heard coming from the solenoid at the same time. Technician A says the starter motor may have an open armature or field current. Technician B says the starter solenoid needs to be replaced. Who is correct?

A. Technician A only B. Technician B only C. Both Technician A and B D. Neither Technician A nor B

Trades & Technology

An ash ____ is a small door in the floor of the fireplace.

A. box B. throat C. pit D. dump

Trades & Technology

In the case of design/build, the constructor acts as a general contractor with single-firm control of all subcontractors

Indicate whether the statement is true or false

Trades & Technology

Technician A says that before a damaged frame section can be removed from the rest of the frame, it must be roughly repaired to relieve the stresses. Technician B says a butt joint with insert is commonly used when an enclosed box rail section is replaced. Who is correct?

A. Technician A only B. Technician B only C. Both Technicians A and B D. Neither Technician A nor B

Trades & Technology