A final drive ratio has been calculated to be exactly 3:1. This gear set ________
A) Is a hunting type gear set B) Will decrease torque
C) Should have one tooth removed D) May have timing marks
D
You might also like to view...
Answer the following statement(s) true (T) or false (F)
Back-pressure backflow is the same as back-siphonage backflow.
The volume of a cone is equal to ?r2h where r is the radius and h is the height of the cone.
Answer the following statement true (T) or false (F)
How are voltmeters connected to read the voltage drop across a load in a circuit?
A) Voltmeters are connected in series with the load. B) Any connection to the circuit will give the same reading. C) Voltmeters are connected in parallel with the load. D) One lead is connected to the load, and the other lead is connected to ground.
When preparing aluminum pipe coupons, use an approved solvent and a clean rag to remove any grease or
oil within a minimum of _____. a. 1-1/2" from the weld joint b. 1" from the weld joint c. 3/4" from the weld joint d. 1/2" from the weld joint