A switch pole is the ________ moved by the switching mechanism
A) External conductor B) External contact C) Internal conductor D) Internal contact
C
You might also like to view...
The part of the clutch that sends torque out through (or output) it is the:
a. pressure plate b. clutch disc c. release mechanism d. flywheel
A forehand travel angle will result in:
A) Less penetration B) Higher travel speed C) Flatter weld profile D) All of the above
Why might adjusting the oxygen flow during a brazing project by standing in front of the cylinder and slowly opening the valve all the way create a hazardous situation?
A) The valve should only be opened halfway. B) The valve should only be opened two-and-a-half turns. C) The valve should be opened while standing behind the cylinder. D) The valve should be opened quickly to relieve pressure.
A vehicle is sprayed with a clearcoat, which normally can be sanded and polished after curing for 5 hours at 70°F. The temperature on the day that the vehicle is painted is 85°F. How long will it be before that vehicle can be sanded and polished, using the 15° rule?
What will be an ideal response?