A common source of vacuum for boosters used on diesel engines is ________

A) Exhaust manifold B) Carburetor
C) Auxiliary vacuum pump D) Intake manifold


C

Trades & Technology

You might also like to view...

Answer the following statement(s) true (T) or false (F)

1. A network constitutes one rung of a ladder diagram that starts at the right rail and ends at the left rail. 2. The easiest way to avoid nesting is to remember that all branches must start at a common point, and all of the branches must end at the same location. 3. The way the processor scans the program is the same from PLC to PLC. 4. It is common practice to wire the overload contacts to an input module. 5. When a hard-wired backup control circuit is used in conjunction with a PLC to control a motor, then the overload contact on the motor starter must be wired in series with the motor coil to provide protection for the motor under both means of control, PLC and hard-wired.

Trades & Technology

____________________ is the process of mating the valve and the valve seat together to ensure a complete fit between the valve and the valve seat.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

Identify and state the historical significance of the "fourth party system".

What will be an ideal response?

Trades & Technology

Tariff rate quotas reduce the tariffs above some specified quantity

Indicate whether the statement is true or false

Trades & Technology