Pinion preload is being set on a pinion using a collapsible spacer. After tightening the pinion nut the preload exceeds the specification by 20 inch pounds. What should the technician do?
A) Loosen the nut until the proper preload is measured
B) Leave the nut in place, since the bearings will "wear in"
C) Replace the bearings and start over
D) Replace the spacer and repeat the adjustment
D) Replace the spacer and repeat the adjustment
You might also like to view...
The vertical change in elevation divided by the horizontal distance reveals the ____________________ of slope
Fill in the blank(s) with correct word
A type of siding that resists fire and exposure to salt water spray is _____
A) aluminum B) board-and-batten C) vinyl D) fiber-cement
A 5/16-inch cut is removed from a 31/64-inch block. What is the resulting thickness of the block in inches?
What will be an ideal response?
A DVOM is an important ____________________ tool.
Fill in the blank(s) with the appropriate word(s).