What is VC at the end of the input pulse to an RC integrator if the input pulse is 12 V and the pulse width equals one time constant?
A) 4.41 V B) 12 V C) 0 V D) 7.59 V
D
You might also like to view...
Conductor strands exposed as a result of stripping will result in _____.
a. lower conductivity b. overheating c. a safety hazard d. low mechanical strength
Needle valves are used for fine flow control because _____.
a. the shape provides a gradual increase or decrease in the size of the valve opening b. they are very inexpensive c. they are made of stainless steel d. they exhibit high head loss
An op amp integrator is designed
A) for an output that is proportional to the rate of change of the input. B) with a capacitor in the input circuit. C) with an op amp in the non-inverting configuration. D) for detection of the transition of input pulses. E) none of the above
Which factors can cause turbulent flow?
A. The diameter of a pipe is increased. B. The flow rate is reduced. C. The temperature to which the fluid is exposed decreases.