Which of the following is a main component of a rotary compressor?

A) Lobe
B) Piston
C) Valves
D) Counterweight


Answer: A
Explanation: A) Correct. The main components of a rotary compressor are housing (casing), shaft, inlet (suction), outlet (discharge), lobes, gears, or vanes.
B) Incorrect. The main components of a rotary compressor are housing (casing), shaft, inlet (suction), outlet (discharge), lobes, gears, or vanes.
C) Incorrect. The main components of a rotary compressor are housing (casing), shaft, inlet (suction), outlet (discharge), lobes, gears, or vanes.
D) Incorrect. The main components of a rotary compressor are housing (casing), shaft, inlet (suction), outlet (discharge), lobes, gears, or vanes.

Trades & Technology

You might also like to view...

If a CMU wall is vertically reinforced at 8 in. on centers, which of the following units will you recommend for use in the wall?

A) Sash unit B) H-unit C) A-unit D) Bond beam unit E) Standard unit with three webs

Trades & Technology

All of the following statements are true EXCEPT:

A. cams with mechanical valve lash adjustment have a clearance ramp at the beginning and end of each lobe. B. a high performance camshaft will have high engine vacuum at idle. C. advanced cam timing improves low and mid-range torque. D. retarded cam timing improves high rpm power.

Trades & Technology

Technician A says that wheel cylinder dust boots keep dust and moisture out of the cylinder bore. Technician B says that it is normal for dust boots to allow a little seepage of fluid. Which technician is correct?

A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B

Trades & Technology

The outcome of an electric shock is based on _____

a. the amount of resistance in the circuit that produces the shock b. the amount of current that flows through the body c. the voltage level of the circuit that produces the shock d. whether the power is AC or DC

Trades & Technology