A one -way clutch in a reverse direction ________.
A) Is released by a group of springs
B) Is applied by hydraulic pressure
C) Self-applies whenever one of the races tries to rotate in a reverse direction
D) Any of these
C) Self-applies whenever one of the races tries to rotate in a reverse direction
You might also like to view...
By 1937, ____________________ draft horses became the preferred breed to use on the farms of the Midwest due to their smaller, more compact build and economic efficiency.
Fill in the blank(s) with the appropriate word(s).
In most situations a ____ soldering iron is adequate.
A. 15- to 25-watt B. 25- to 35-watt C. 30- to 40-watt D. 35- to 45-watt
Most sealed bearings used on the front wheels of front-wheel drive vehicles are usually which type?
A) Needle roller bearing B) Double row ball bearing C) Single tapered roller bearing D) Roller bearing
On a starting relay, the component can be tested to see if it is electrically acceptable using a standard ________ or capacitance meter
A) ammeter B) multimeter C) voltmeter D) ohmmeter