Technician A says that a clutch disc is aligned with the flywheel automatically when the pressure plate bolts are tightened properly. Technician B says that a tool should be used to align the clutch disc during installation. Which technician is correct?
A) Technician A only
B) Technician B only
C) Both technicians
D) Neither technician
B) Technician B only
You might also like to view...
Asynchronous counters are commonly referred to as ____ counters.
A. decade B. up-down C. ripple D. parallel
What was the purpose of the Nuremberg Laws of 1935?
a. to biologically categorize Jewish identity and strip Jews of citizenship b. to extend legal and public space restrictions on Jews and other non-Aryans c. to legalize the theft and appropriation of Jewish property d. to ban Jews from civil service and other governmental professions
What could cause a false high reading for the supply-air temperature?
A) If the temperature is taken with the blower on at the same time the heating elements are on. B) If the temperature is taken after the unit has been running for too long. C) If the probe is inserted in the supply plenum in a direct line of sight with the heating elements. D) If the temperature is taken with a probe inserted upside down.
Technician A says that the brake pedal height should be checked as part of a brake system inspection. Technician B says the pedal free play and pedal reserve should be checked. Which technician is correct?
A) Technician A only B) Technician B only C) Both Technicians A and B D) Neither Technician A nor B