?Explain the acceptance criteria for a bend test.
What will be an ideal response?
?No single indication shall exceed 1/8 in. (3.2 mm) measured in any direction on the surface.The sum of the greatest dimensions of all indications on the surface that exceed 1/32 in. (0.8 mm) but are less than or equal to 1/8 in. (3.2 mm) shall not exceed 3/8 in. (9.5 mm).
You might also like to view...
The same organization above experienced 205 injuries in 2007, 233 injuries in 2008, and 256 injuries in 2009 over the same time frame during the year. The total actual hours worked were 11,205,505, 10,605,876, and 11,342,110 for each year, respectively. Calculate the injury rates for each year and the percentage of increase for each year.
What will be an ideal response?
Which type of fabric is said to be the most prized?
What will be an ideal response?
What controls the case temperature in most supermarket cases on parallel rack systems?
a. Solenoid valve. b. EPR valve c. CPR valve
The waste disposal system should have a ____ inch drop for every horizontal foot of distance.
A. 1/16 B. 1/8 C. 1/4 D. 1/2