If you are employed as the resident project representative on a project, upon being given specific instruction as to special quality control methods on a type of material you have worked with for many years without such special controls. YOU should:
A. agree to follow them, but may privately relax them to what your previous experience tells you is adequate for the job.
B. just ignore them, and run the job the same way that you always have for years in the past.
C. follow them faithfully, even if you do not understand the reasons for such special requirements.
D. call the architect or engineer and explain how unreasonable they are.
E. use your own judgment as to the validity of the requirements.
C
You might also like to view...
Some vehicles are equipped to signal the computer whenever the power steering pressures increase so the idle speed can be increased to prevent stalling during turns at low speeds. What component signals the computer?
A) Power steering pressure switch B) Flow control valve C) Pressure relief valve D) Rotary Valve
If A = 3 times 10 to the power of negative 6, and B = 2 times 10 to the power of 5, what is the product of A times B?
A. 6 times 10 to the power of negative 1 B. 6 times 10 to the power of 1 C. 6 times 10 to the power of 11 D. 6 times 10 to the power of 30 E. none of the above
Which of the following is a true statement about rigging hardware?
a. Shouldered eyebolts are not acceptable for lifting operations. b. Screw-pin shackles require a cotter key to be installed in the end of the pin. c. Serrated-jaw clamps are the only type of hardware that needs no rated load information. d. Plate clamps are designed to lift only one plate at a time.
A jalapeno canning company is faced with a make/buy decision. Cardboard shipping cartons can be purchased for $0.60 each or made in-house. If manÂufactured, two machines will be required. Machine X will cost $20,000 and have a life of 6 years with a $2000 salvage value. Machine Y will cost $11,000 and have a life of 4 years with no salvage value. The annual maintenance cost for machines X and Y are $6000 and $5000 per year, respectively. A total of four operators will be required for the two machines at a rate of $22.50 per hour per person. In a normal 8-hour day, the four operators and two machines can produce 1000 cartons. The variable cost per carton associated with the in-house option is closest to: (choose one)
(a) $0.0625 (b) $0.10 (c) $0.72 (d) $0.81