PROBLEM 3.151 A steel pipe of 12-in. outer diameter is fabricated from -thick plate by welding along a helix which forms an angle of 45? with a plane perpendicular to the axis of the pipe. Knowing that the maximum allowable tensile stress in the weld is 12 ksi, determine the largest torque that can be applied to the pipe.
You might also like to view...
Technician A says that low oil pressure causes engine wear. Technician B says that engine wear causes low oil pressure. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
How is Indoor Air Quality (IAQ) defined?
A) Cleaning the air inside a building to acceptable levels B) Air that is free from toxins, irritants, and noxious chemicals C) The state of the air contained within an enclosed building D) Air that is within the human comfort range and free of noxious substances
When is it important to make sure and match the polarity of the meter leads to the polarity of the circuit being tested?
A) With all readings B) When reading DC voltage C) When reading AC voltage D) When reading resistance
What is the maximum current in a 12 mH inductor if it is connected in series with a 10 k? resistor and a 15 VDC source?
A) 2.2 mA B) 1.5 mA C) 1.2 mA D) 6.32 mA