If you have a 1/4 - 20 UNC threaded screw and rotate it ten full turns, the end will travel 1/2".
Answer the following statement true (T) or false (F)
True
You might also like to view...
A shaft is turned at 220 revolutions per minute with a tool feed of 1/16 inch per revolution. How many minutes does it take to cut a distance of 55 inches along the shaft?
A. 2 B. 2 1/2 C. 3 D. 4
The term "____________________ foods" is used to describe the beneficial effects of the food that goes beyond its traditional nutritive value
Fill in the blank(s) with correct word
Where in the cycle does heat enter the refrigerant?
A) In the compressor and condenser B) In the evaporator and compressor C) Some heat is added in every component. D) In the evaporator and condenser
Before sliding the fifth wheel forward, the driver should
A. put on the brakes and shift to neutral B. move the kingpin to the left and move the tractor forward C. put the tractor in reverse D. disconnect the air lines and put the tractor in neutral