The Q-function is often used in the communications literature to express the probability of error. Unfortunately, Matlab® does not have a built-in Q-function; however, the built-in complementary error function erfc(x) can be used to obtain the Q-function:
Obtain an expression for Q(x) in terms of erfc(x).
Analysis:
You might also like to view...
What type of fittings are used to build an offset in a cable tray system?
a. Vertical adjustment splice plates b. Divider strips c.Wyes d. Tees
____ payback is the cost of energy efficiency upgrades divided by energy savings.
A. Efficiency B. Energy efficiency C. Green D. Simple
PROBLEM 3.132 Shafts A and B are made of the same material and have the same cross-sectional area, but A has a circular cross section and B has a square cross section. Determine the ratio of the maximum shearing stresses occurring in A and B, respectively, when the two shafts are subjected to the same torque (TA = TB). Assume both deformations to be elastic.
Ungrounded electrical systems with conductors installed in grounded metal raceways and enclosures
A. have no voltage to ground. B. have an approximate half system voltage to ground. C. present no shock hazard to personnel. D. cannot become grounded as there is no connection to the ground rod.