Given the following information what conclusion can be made?  a = 22 cm, b = 7 cm, c = a + b.

Fill in the blank(s) with the appropriate word(s).


c = 29

Trades & Technology

You might also like to view...

Scan tools are capable of testing many on-board computer systems such as which of the following?

A. Transmission control B. Engine computers C. Antilock brake computers D. Air bag computers E. All of the above

Trades & Technology

The pressure relief valve ____.

A. regulates the pressure of the water in the supply line B. is set to relieve the pressure in the boiler below the maximum design pressure of the boiler C. shuts the boiler off if the water temperature gets too high D. relieves the pressure in the expansion tank

Trades & Technology

A suitably strong aggregate material for use in high-strength concrete is _____

a. slag b. soft sandstone c. coal d. shale

Trades & Technology

What is the major difference between SRAM and DRAM?

A) Dynamic RAMs are always active; Static RAMs must rest between data read/write cycles. B) DRAMs must be periodically refreshed. C) The only difference is the terminal from which the data is removed: from the FET Drain or Source. D) SRAMs can hold data via a static charge, even with power off.

Trades & Technology