?How does the flux in a FCAW wire compare to a SMAW electrode and what does it affect?
A. ?FCAW has less flux but the wire is fed into the weld faster so there is more slag on a weld as compared to a SMA weld.
B. ?Both processes' filler metals have the same amount of flux, but only the FCAW flux gets pushed deeper into the molten weld pool.
C. ?FCAW wire has a lower flux to metal ratio so it is more efficient than SMAW.
D. ?SMAW filler rods are a lot bigger than FCAW wire but there is more flux to filler metal in the FCAW filler wire.
Answer: C
You might also like to view...
The density of water vapor in air changes rapidly with the change in air temperature. Data were recorded from an experimental test and are shown in the following table:
When used as pure gases for welding ferrous metals, ____ may produce an erratic arc action, promote undercutting, and result in other flaws.
A. oxygen B. carbon dioxide C. active gases D. argon and helium
Heinrich's Domino Theory has two central points: 1) injuries are caused by the preceding factors; and 2) removal of the central factor (an unsafe act or hazardous condition) negates the action of the preceding factors and, in so doing, prevents accidents and injuries
Indicate whether the statement is true or false
The derivative output will be the ____ polarity as the proportional output when the error is decreasing.
A. same B. opposite