What lubricant should be used when mounting a tire?
A) Grease B) SAE 10W-30 engine oil
C) Water-based soap D) Silicone spray
C
You might also like to view...
What happens if you use two household cordless phones at the same time? Explain with appropriate reasons.
What will be an ideal response?
Technician A says that a scan tool should be disconnected from the DLC with the ignition switch on. Technician B says that on some computer-controlled air suspension systems, the scan tool may be used to command the computer to fill and vent each air spring. Who is correct?
A. A only B. B only C. Both A and B D. Neither A nor B
If a wire repair, such as that made under the hood or under the vehicle, is exposed to the elements, which type of repair should be used?
A) Wire nuts and electrical tape B) Rosin-core solder and electrical tape C) Butt connectors D) Solder and adhesive -lined heat shrink or crimp-and-seal connectors
A flow-check valve, or spring-loaded check valve, needs to be installed in each piping circuit anytime multiple circulators are installed ____.
a. in series b. proportionally c. in half unions d. in parallel