In the circuit shown in Figure P3.5, the mesh currents are
I1 = 5A I2 = 3A I3 = 7A
Determine the branch currents through:
a. R1.
b. R2.
c. R3.
Analysis:
a) Assume a direction for the current through (e.g., from node A toward node B). Then summing currents at node A:
This can also be done by inspection noting that the assumed direction of the current through R1 and the direction of I1 are the same.
b) Assume a direction for the current through R2 (e.g., from node B toward node A). Then summing currents at node B:
This can also be done by inspection noting that the assumed direction of the current through R2 and the direction of I3 are the same.
c) Only one mesh current flows through R3. If the current through R3 is assumed to flow in the same direction, then:
You might also like to view...
Sugars that predispose degus to diabetes are derived mainly from _____
a. dandelions b. molasses c. yams d. corn
A 150-hp, 460-volt synchronous motor is to be operated at 80% power factor. What will be the full-load current rating of the motor? Use the accompanying figure
a. 66
b. 81
c. 127
When pedicure service, the customer's feet should be placed on a:
What will be an ideal response?
Which of the following is not a commonly used battery type?
A) mercury B) carbon-zinc C) helium-oxide D) alkaline