Equipment will perform at it's best efficiency when running at full load.
Answer the following statement true (T) or false (F)
True
You might also like to view...
A recent attempt to circumnavigate the world in a balloon used a helium filled balloon whose volume was 7240 m3 and surface area was 1800 m2. The skin of this balloon is 2 mm thick and is made of a material whose helium diffusion coefficient is 1?10-9 m2/s. The molar concentration of the helium at the inner surface of the balloon skin is 0.2 kmol/m3 and the molar concentration at the outer surface is extremely small. The rate at which helium is lost from this balloon is
(a) 0.26 kg/h (b) 1.5 kg/h (c) 2.6 kg/h (d) 3.8 kg/h (e) 5.2 kg/h
If the compressor will not operate in the cooling mode, the best thing to do is _____
a. immediately replace the compressor b. make sure the compressor is getting voltage c. see if the compressor runs in other modes d. check the refrigerant charge
The output voltage of a step-up regulator is
A) equal to the sum of the capacitor voltage and the inductor voltage B) never more than twice the input votlage C) both a and b D) step-up regulators step up current only
List three functions controlled by the driver door module.
What will be an ideal response?