One of the most common substances that is used as an absorber is ____.
A. charcoal
B. silica gel
C. fiberglass
D. foam rubber
Answer: A
You might also like to view...
For 1,3-butadiene at T = 350 K and P = 1.5 MPa, use the Peng-Robinson EOS to find the liquid and vapor phase fugacities, and determine which phase is stable at equilibrium.
A. fL = 0.917 MPa, fV = 1.278 MPa, liquid phase stable B. fL = 0.917 MPa, fV = 1.278 MPa, vapor phase stable C. fL = 0.917 MPa, fV = 1.161 MPa, vapor phase stable D. fL = 0.917 MPa, fV = 1.161 MPa, liquid phase stable E. None of these are correct.
Mechanically held contactors and relays are often referred to as ____________________ contactors or relays.
What will be an ideal response?
Two unskilled part handlers load forms into a fixture in a robot molding work cell and unload the finished product every twenty minutes. The robot is in the pause mode will they work. The robot is in the pause mode will they work. The probability of injury is __________
A) Certain B) Probable C) Unlikely D) Possible
A hydronic radiant panel is any object warmed by passing heated water through tubing embedded in or attached to it, and which releases at least ____ of that heat to its surroundings as thermal radiation, and has a controlled surface temperature under 300 °F.
a. 80% b. 60% c. 50% d. 40%