When constructing a wall frame, the proper nailing surface for gypsum board is _____
a. 1/8? to 1/4?
b. 1/4? to 1/2?
c. 3/8? to 1/2?
d. 3/4? to 1?
d
You might also like to view...
The purpose of the defrost cycle in a heat pump is to _____.
a. warm the unit circuits for optimum electrical operation b. prevent ice buildup on the indoor coil c. prevent ice buildup on the outdoor coil d. remove frost buildup throughout the system ductwork
When considering GM transmissions/transaxles, the major difference in the design of the 4L60-E and the 4L65-E is the number of planetary pinion gears. 4L60s have ____________________ pinion gears and the 4L65s have ____________________ pinion gears.
Fill in the blank(s) with the appropriate word(s).
All of the following statements are true EXCEPT:
A. a ruined transmission oil line should not be repaired with a union. B. fuel hose will be damaged by automatic transmission fluid. C. if the car has an automatic transmission, it is usually equipped with a transmission oil cooler (TOC) on the bottom or side of the radiator. D. many of today's engines do not have belt-driven cooling fans or air pumps for the emission control system.
When preparing old metal for painting, any ____________________ or ____________________ left
will prevent the paint from holding to the metal.
Fill in the blank(s) with the appropriate word(s).