Answer the following statement(s) true (T) or false (F)
1.During the rough-in wiring phase, an electrician always installs cable through floors or ceilings, which provides shorter routes than do perimeter walls.
2.The electrician can incorporate waste from the rough-in and trim-out wiring phases into the jobsite-recycling system.
3.Type AC cable installed in thermal insulation must have conductors rated at 90°C (194°F).
4.Most engineered I-beams come from the manufacturer with perforated knockouts that allow an electrician to remove the knockout and install cables through the holes.
5.Type NM and Type UF cables must have their cable sheath extend into nonmetallic boxes and beyond any cable clamp at least 1/2 inch (6 mm).
1.false
2.true
3.true
4.true
5.false
You might also like to view...
Technician A says a variable displacement rotor-type oil pump is used in a 4L60 transmission. Technician B says a variable displacement vane-type oil pump is used in a 3L30 transmission. Who is correct?
A. A only B. B only C. Both A and B D. Neither A nor B
Chewing insects tear off bits of plants using _____________________ (jaws) that are strong enough to bite off plant parts and grind the material up by chewing
Fill in the blank(s) with correct word
Cast-iron cylinder sleeves are either cast into the aluminum block during manufacturing or pressed into the aluminum block. These sleeves are not in contact with the coolant passages and are called ________
A) Wet cylinder sleeves B) Siamese cylinders C) Aluminum sleeves D) Dry cylinder sleeves
Compared to hot water heating coils, steam heating coils are:
A) Mostly plastic materials rather than metal. B) Physically smaller. C) Physically larger. D) More complicated in construction.