A V groove weld symbol showing (3/8) along with a 1/2 to the left of the symbol, both of which are under the reference line means ____.
A. the weld depth on the arrow side should be 3/8", and the root penetration should be 1/2"
B. the depth that the weld penetrates the surface should be 3/8" on the arrow side and the root penetration should be 1/2"
C. the depth that the weld penetrates the surface should be 1/2" on the other side and the root penetration should be 3/8"
D. the depth that the weld penetrates the surface should be 1/2" on the arrow side and the root penetration should be 3/8"
E. None of the above. This is an incorrect symbol.
Answer: E
You might also like to view...
The red-eared waxbill is a small, docile bird
Indicate whether the statement is true or false
If it is tripped, which type of safety device will keep the electric fuel pump from operating?
A) Antisiphoning valve B) Inertia switch C) Rollover valve D) Check valve
The TP sensor effects the operation of all of these EXCEPT ________
A) Air conditioning compressor operation B) Clear flood mode operation C) Determining rich and lean air-fuel mixtures D) Torque converter clutch operation
Where does the current come from that moves the needle on an analog volt meter?
A) The volt meter uses induction to produce a small electric current using the magnetic field surrounding the wire it is testing. B) The battery inside the meter C) No current is required to move the needle on an analog volt meter. D) The meter uses a small amount of current from the circuit it is testing.