When tri-state outputs are used in a GAL22V10
A) all outputs must be controlled with the same control input.
B) only one product term can be used to control the output.
C) a single pin must be used for all tri-state control.
D) multiple product terms can be used to control the output.
B
You might also like to view...
_____ help to reduce the number of repairs or rejections when welding under less-than-ideal conditions.? ?
A. Filler metals? B. Consumable inserts? C. Electrodes? D. Chemical pumps?
What does the "delta pressure method" mean?
A) Using a handheld tester to read the pressure as reported by the sensor B) Inflating the tire to the specified pressure C) Activate the sensor so it broadcasts the pressure to the scan tool D) Change the inflation pressure
Technician A says that measuring SAI and included angle can help in diagnosing cradle misalignment. Technician B says that alignment angles can often reveal bent suspension or steering components. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
The jump command is an __________ instruction.
A. input B. output