Bend allowance is important when ____.
A. the length of the neutral axis equals the material thickness
B. close tolerances must be held
C. thick material must be bent or formed into desired shapes
D. both b and c
E. none of the above
Answer: D
You might also like to view...
____ steels are fairly precise in size and have square corners.
A. Hot-tempered B. Hot-rolled C. Cold-tempered D. Cold-rolled
Which of the following is NOT powered by the auxiliary battery in Ford and Toyota hybrids?
A. Hybrid control module B. Engine starter C. Exterior lights D. Power steering motor
An electric switch manufacturing company is trying to decide between three different assembly methods. Method A has an estimated first cost of $40,000, an annual operating cost (AOC) of $9000, and a service life of 2 years. Method B will cost $80,000 to buy and will have an AOC of $6000 over its 4-year service life. Method C costs $130,000 initially with an AOC of $4000 over its 8-year life. Methods A and B will have no salvage value, but Method C will have equipment worth 10% of its first cost. Perform both (a) future worth, and (b) present worth analyses to select the method at i = 10% per year.
What will be an ideal response?
Describe the six implementation issues confronting the implementation of the smart grid
What will be an ideal response?