The two basic methods for dimensioning a part on a welding drawing are baseline and _____
a. conventional dimensioning
b. reference dimensioning
c. ordinate dimensioning
d. linear dimensioning
a
You might also like to view...
The maximum nosing projection allowed for a stair is _______.
A) 2 in. B) 1-1/4 in. C) 2-1/2 in. D) 1-1/2 in. E) 3.0 in.
Hermit crabs are _____
a. insectivores b. herbivores c. omnivores d. carnivores
Increasing the airflow across a coil:
A) Increases the static pressure drop across the coil. B) Increases the temperature drop across the coil. C) Decreases the static pressure drop across the coil. D) Increases the latent cooling capacity of the coil.
____ contain: orthographic views of the column; locational dimensions for plates, angles, and holes; length dimensions; the baseplate configuration; connection specifications; and miscellaneous notes for the fabricator.
A. Beam fabrication details B. Column fabrication details C. Cross section fabrication details D. Longitudinal fabrication details