How would you remove a "hairpin" push connector?
What will be an ideal response?
To remove a "hairpin" push connector, separate the clip legs by about 1/8" and pull the triangular tab to remove the clip. Then firmly and gently pull the nylon line from the steel line.
You might also like to view...
An insulated steam turbine is to produce 100 MW of power. Superheated steam enters the turbine at 12 MPa and 600°C, and saturated water exits the turbine at a pressure of 80 kPa. There are two design constraints to be considered:
(1) The turbine blade design requires that the quality of the steam to be no less than 0.90 to maintain blade durability. (2) The maximum mass flow rate of steam that the system can utilize is 100 kg/s. Plot the mass flow rate of steam necessary to produce 100 MW of power for exit qualities ranging from 0.9 to 1.0, and then determine the range of exit qualities that satisfy both design constraints. Determine the necessary mass flow rate of the steam. Given: P1 = 12.0 MPa; T1 = 600°C; W?=100 MW=100,000 kW; P2 = 80 kPa; Steam State 1 is the inlet, state 2 is the outlet. Assume: Q? = 0 (insulated) Also, for a turbine, assume steady-state, steady-flow, single-inlet, single-outlet flow, with ?KE = ?PE = 0
The oxyacetylene torch is often referred to as a _____ wrench.?
A. gas? B. fire? C. smoke? D. discharge?
Straight-run chicks are not divided by their:
A. age B. weight C. sex D. breed
Describe factors that might impact the level of detail used in a schedule
What will be an ideal response?