Technician A says that a low-side driver provides a path to ground. Technician B says that a high-side driver provides a positive voltage. Who is correct?
A. A only
B. B only
C. Both A and B
D. Neither A nor B
Answer: C
You might also like to view...
What pumping principle is used on transfer pumps on a majority of diesel engines today?
A. reciprocating plunger B. centrifugal C. gear D. swash plate
What kind of scales are used for site plans and other topographic uses?
What will be an ideal response?
The Ku Klux Klan nearly collapsed in the late 1920s when
A. the immigration restriction laws of the early 1920s were repealed. B. the organization was publicly exposed as a corrupt and cynical racket. C. the advent of radio led to a new level of public knowledge and tolerance. D. the Klan proved unable to implement its program. E. both political parties sharply criticized the Klan as un-American.
The following statements are all correct EXCEPT ________
A) Recommended oil pressure is 1 PSI for every 1000 RPM. B) Oil pressure readings should be made at idle and 2500 RPM. C) Oil pressure testing should be done at normal operating temperature. D) Oil pressure may be tested by removing the oil pressure sending unit and installing a pressure gauge.