Two technicians are discussing torsion bars. Technician A says that many torsion bars are adjustable to allow for ride height adjustment. Technician B says that torsion bars are usually marked left and right and should not be switched side to side. Which technician is correct?
A) Technician A only B) Technician B only
C) Both technicians A and B D) Neither technician A nor B
C
You might also like to view...
The total number of existing wells on the site is______, and the total number of existing septic tanks is______.
Fill in the blank(s) with the appropriate word(s).
A DTC (Diagnostic Trouble Code) P0301 (misfire on cylinder 1 ) on a waste spark system could be caused by all of these, EXCEPT ________
A) Defective #1 spark plug B) Open plug wire on cylinder 1 C) Defective Pick-up coil D) Open spark plug wire on cylinder 4 (companion to cylinder 1)
What are the factors that determine the electrical resistance of a length of copper wire?
A. Overall length of the wire B. Temperature of the wire C. Sectional area of the wire D. All of the above
How do you say 4.0082?
A. Four and 82 ten-thousandths B. Four and 82 thousandths C. Four and 82 hundredths D. Four and 82 tenths