All safety glasses should meet standards set by _________

A) SAE B) ANSI C) ASE D) DOT


B

Trades & Technology

You might also like to view...

Answer the following statement(s) true (T) or false (F)

1. An induction motor becomes an induction generator when driven by a prime mover such as a wind turbine. 2. Rotor speed below or above synchronous speed is called torque. 3. Reactive power is that power used by inductive and capacitive loads when current and voltage are out of phase. 4. A synchronous generator is run at synchronous speed, which means it must be driven by a prime mover at a variable RPM. 5. A transmission grid is a network of power stations, transmission circuits, and substations.

Trades & Technology

Roughly how old is WLF construction?

What will be an ideal response?

Trades & Technology

Determine the pressure of the system and the equilibrium constant for the reaction.

A reaction A+B?C+D occurs in the liquid phase at 298.15 K. A vapor phase is also present, but no reaction occurs in the vapor phase. The liquid is an ideal solution and the vapor is an ideal gas. Vapor pressures are 0.12 MPa for compound A, 80kPa for compound B, 0.15 MPa for compound C and 70kPa for compound D. At equilibrium the liquid phase consists of 36 mol% A, 33 mol% B, 11 mol% C and 20 mol% D. A. P = 0.42MPa; KT = 5.4 B. P = 0.42 MPa; KT = 0.185 C. P = 0.1 MPa; KT = 5.4 D. P = 0.1 MPa; KT = 0.185 E. Solution not possible with information given

Trades & Technology

Blowby is a term used to describe:

a. how much exhaust leaks by the exhaust valve b. how much fuel leaks past the injector c. the combustion pressure that leaks into the crankcase d. the compression pressure that leaks into the cooling system

Trades & Technology