Technician A says that wear indicator ball joints should be unloaded to check properly. Technician B says that wear indicator ball joints should be checked with the weight of the vehicle on the ground. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
B
You might also like to view...
A ____ is placed inside designated partitions, walls, or other concealed areas as a protective cover for cables.
a. conduit b. pipe c. raceway d. hanger
Draw the welding symbol used to describe the welds at the circumferential weld seams where the 3/8” thick shell sections are welded together.
Refer to Drawing Numbers T6592ML R0, T6593ML R0, and T6594ML R0.
The takeout of a fitting is the _____.
a. best way to remove the fitting b. center line of the fitting to the bottom of the socket c. length of the pipe inside the fitting d. number of fittings in the run
A typical evaporator temperature of a reach-in at a 0° box temperature is
a. -20° b. -10° c. 0° d. +10°