Technician A says that the piston and rod assembly should be installed in the cylinder after being carefully fitted for each bore. Technician B says that connecting rod side clearance should be checked with a feeler (thickness) gauge. Who is right?
A) Technician A only B) Technician B only
C) Both technicians A and B D) Neither technician A nor B
C
You might also like to view...
Use the graphic scale shown on the map of the State of Texas in Figure R3–1 to approximate the distance between the following locations using the most direct route.
1. Laredo to Cotulla. 2. Beaumont to Houston. 3. Dallas to the State of Louisiana. 4. Lake Meredith to Lubbock. 5. Baffin Bay to San Antonio.
What is the primary use of nutrients in a ration?
What will be an ideal response?
How does pressure affect the boiling temperature of a liquid?
A) Pressure has no effect on the boiling temperature of a liquid. B) Decreasing the pressure increases the boiling point. C) The pressure cannot change once a liquid begins to boil. D) Increasing the pressure increases the boiling point.
Regarding contour lines drawn on a site or plot plan, what is indicated when the contour lines are drawn closely to one another?
A) The land is relatively flat B) The land has little or no change in elevation C) The land is relative to a specified direction D) The land is relatively steep