A source, a path, and a load ________
A) do not make up a complete circuit B) will allow current to flow if the switch is open
C) can only be an open circuit D) make up a basic circuit
D
You might also like to view...
In swine with level top lines, the shoulder bone, or ____________________, and the front leg bone, or ____________________, provide more flex and cushion than the same bones in pigs with high arches.
Fill in the blank(s) with the appropriate word(s).
How is the outlet pressure adjusted on a suction throttling valve?
A. Adjusting screw B. Interchangeable springs C. Shims behind the spring D. Adjustment of the piston
All overload relays contain a set of normally ____________________ contacts.
Fill in the blank(s) with the appropriate word(s).
Repeat all parts of Problem 6.70 for the circuit of Figure P6.72 and the frequency response:
Repeat all parts of Problem 6.70 for the circuit of Figure P6.72 and the frequency response:
Let R1 = R2 = 1k?, C = 1?F, L = 1 H.
Use the same component values as in Problem 6.70.
Problem 6.70
For the circuit shown in Figure P6.70:
a. Determine the frequency response
b. Sketch, by hand, the associated Bode magnitude and phase plots. List all the steps in constructing the plot. Clearly show the break frequencies on the frequency axis. (Hint: Use the MatlabTM command “roots” or a calculator to quickly determine the polynomial roots.)
c. Use the MatlabTM command “Bode” to generate the same plots. Verify your sketch.
Assume
R1 = R2 = 2k?, L = 2 H, C1 = C2 = 2 mF.
