The root reinforcement on the inside of the pipe from a completed weld should be flush to a maximum of
_____.
a. 1/8" (3 mm)
b. 1/4" (6 mm)
c. 1/16" (1.6 mm)
d. 1/2" (13 mm)
WELDING LEVEL THREE MODULE 29306-16 EXAM 2
Copyright © 2016 NCCER. Permission is granted to reproduce this page provided that copies are for local use only and that each copy
contains this notice.
a
You might also like to view...
What is the difference between the way a self-threading and a self-drilling sheet metal screw is used?
A) Self-threading screws must have a pilot hole. B) Self-threading can only be installed with a counterclockwise rotation. C) Self-drilling can only be installed with a counterclockwise rotation. D) Self-drilling screws must have a pilot hole.
The temperature at which a liquid first condenses from a vapor that is cooled is known as the _____.
a. dew point b. flash point c. startup temperature d. temperature gradient
Normal resting body temperature of adult camelids _____
a. is very consistently 98.5°F b. ranges from 99.5°F to 102°F c. can reach 114°F on a summer day d. varies from 97.5°F to 110°F
Technician A uses tall safety stands to provide additional support for a vehicle in a lift. Technician B always lowers the vehicle on the mechanical locks after lifting the vehicle to proper working height. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B