The recommended horizontal overlap for vinyl siding panels is _____
a. 1/2"
b. 5/8"
c. 3/4"
d. 1"
d
You might also like to view...
A diode that is designed to block reverse bias current but only up to a specified voltage is known as?
A. blocking diode B. photo diode C. zener diode D. small signal diode
A feed of 5 kg/s of saturated liquid water is entering the pump in a Rankine cycle at a temperature of 423.15 K. The pump is supplied with 412.5 W of shaft work from an electric motor. What are the approximate outlet pressures from the pump, as calculated assuming that (1) the exiting stream is saturated liquid (which is NOT physically reasonable, but the result can be calculated) and (2) isochoric pumping (which is a much more reasonable model)?
A. 4.8 bar; 5.5 bar B. 7.9 bar; 300 bar C. 9.7 bar; 500 bar D. 10.2 bar; 11.7 bar E. Insufficient information to solve
Agencies that set equipment standards and test equipment include
A) CSA and AHRI B) DOE and NIST C) DOE and EPA D) EPA and ASHRAE
A paint department’s lead painter has derived a method of production that will reduce the use of solvent by 25 percent. That department now purchases 64.5 gallons of solvent at $12.34 per gallon. How much will the new method save the company per year?
What will be an ideal response?