Explain how to check for proper contact pressure using a simple resistance test.
What will be an ideal response?
To check for proper contact pressure, use a simple resistance test. With the power off, measure the resistance from the rotor segment to the associated brush pigtail with normal pressure applied. The reading should be very low ohms. If increasing pressure of the brush to the commutator significantly reduces ohm value, then brush pressure may be a problem.
You might also like to view...
El tipo de techo indicado con la letra E en la Figura 1 es un techo _____.
a. de soporte interior
b. de soporte superior
diagonal y soporte interior
"valley"
c. de mansarda
d. de soporte interior y
soporte interior "valley"
At 80°C, water has vf = 0.0010291 m3/kg and vg = 3.407 m3/kg. The water occupies a volume of 0.05 m3. For each mass value below, determine whether the water is a compressed liquid, saturated liquid, saturated mixture, saturated vapor, or superheated vapor and the quality of the water:
(a) 60 kg (b) 5 kg (c) 0.025 kg (d) 0.0147 kg (e) 0.0095 kg Given: vf = 0.0010291 m3/kg; vg = 3.407 m3/kg; V = 0.05 m3 What will be an ideal response?
We use the scientific name because _____
A) the common name is not specific enough B) it is easier to learn C) it is exactly like the common name D) the common name is easier to pronounce
When does a hardscape feature perform an architectural role in the design of the landscape?
What will be an ideal response?