Technician A says that when a differential carrier pinion angle exceeds 7 degrees, lube level should be checked at the banjo housing fill hole. Technician B says that when correcting the lube level in differential carrier housings, the best way is to remove both fill plugs and pump oil into the fill plug at the side of the carrier until it begins to spill from the fill hole in the banjo housing. Who is correct?
A. Technician A only
B. Technician B only
C. Both A and B
D. Neither A nor B
Answer: A
You might also like to view...
How should woodland be managed to increase game populations?
What will be an ideal response?
PROBLEM 3.91 In the stepped shaft shown, which has a full quarter-circular fillet, and Knowing that the speed of the shaft is 2400 rpm and that the allowable shearing stress is 7500 psi, determine the maximum power that can be transmitted by the shaft.
Alternative A has a rate of return of 14% and alternative B has a rate of return of 17%. If the investment required in B is larger than that required for A, the rate of return on the increment of investment between A and B is: (choose one)
(a) Larger than 14% (b) Larger than 17% (c) Between 14% and 17% (d) Smaller than 14%
A company that manufactures air-operated drain valve assemblies currently has $85,000 available to pay for plastic components over a 5-year period. If the company spent only $42,000 in year 1, what uniform annual amount can the company spend in each of the next 4 years to deplete the entire budget? Let i = 10% per year.
What will be an ideal response?