Which of the following section numbers of the Clean Air Act apply to automotive air conditioning refrigerants?
A) 311 B) 609 C) 409 D) 608
B
You might also like to view...
It is most common for ____ motors to use terminal blocks for both single-phase and three-phase motors.
a. IEC b. NEMA c. magnetic d. reversible
A distillation unit is to be used to generate pure water vapor. 5.0 lbm/s of liquid water at 100oF enters the system, and 1.0 lbm/s of saturated water vapor leaves through one port and 4.0 lbm/s of saturated liquid leaves through a second port (along with impurities in the water which can be neglected in the analysis). The pressure throughout the whole system is 20 psia. A stirring system is used, which is powered by a 0.4 hp motor – assume that all of the motor’s work enters the system. All other energy is added through heat transfer.
(a) Determine the rate of heat transfer needed to produce this flow of saturated water vapor. (b) Using your separation chamber model, plot the heat transfer rates needed to produce saturated water vapor flow rates between 0.5 lbm/s and 4.0 lbm/s (along with corresponding changes to the saturated liquid water exit flow rates). State 1: Inlet stream; State 2: Saturated vapor exit stream; State 3: Saturated liquid exit. Given: P1 = P2 = P3 = 20 psia; T1 = 100oF; x2 = 1.0; x3 = 0.0; m?1=5.0lbm/s; m?2=1.0lbm/a; m?3=4.0lbm/a; W?=?0.4 hp=?0.283 Btu/s Assume: Given no other information regarding the mixing chamber, make the following common assumptions: ?KE=?PE=0. We are told there is heat transfer. Also, assume the mixing chamber is a single-inlet, multiple-outlet, steady-state, steady-flow device. What will be an ideal response?
A(n) ____________________ is used when there is a problem with the axle clearing other parts.
Fill in the blank(s) with the appropriate word(s).
? Identify and state the historical significance of Thomas Edison.
What will be an ideal response?