The subsequent problems deal with the circuit below. Assume that when the transistor is in saturation, the collector-to-emitter drop is 0.2 V and the base-to-emitter forward bias voltage is 0.7 V. Assume that the forward bias voltage for the LED is 2 V.
If Vin=5V, what is the voltage at the collector of the transistor?
A. 5 V
B. 2.2 V
C. 0.2 V
D. 0.7 V
E. 0 V
Answer: C
You might also like to view...
? Identify and state the historical significance of the Rio Grande.
What will be an ideal response?
To make the strongest electromagnet you would:
a. make a loop of wire b. make several loops of wire and reverse the current flow c. make several loops of wire around an iron core d. make several loops of wire around a piece of plastic
Which wire on a TP sensor should be back probed to check for a voltage signal to the PCM?
A) Ground wire B) Meter should be connected between 5-volt reference and ground C) 5-volt reference (Vref) D) Signal wire
The key terms to remember when discussing a robot are:
A. programmed and performance B. specialized and reprogrammable C. performance and specialized D. reprogrammable and multifunctional