Ohmmeters are to be used only on circuits that are de-energized.
Answer the following statement true (T) or false (F)
True
You might also like to view...
What is TRUE about a service consultant’s job?
A. They must convince customers that the service facility can help them B. They must convince customers that the service facility wants to help them C. When the service consultant is busy the service systems should not be used D. Both A and B are correct
Draw the objective tree for a high-class cutlery set (sample to start-up discussion)
What will be an ideal response?
The air resistance to motion of a vehicle is something important that engineers investigate. The drag force acting on a car is determined experimentally by placing the car in a wind tunnel. The air speed inside the tunnel is changed, and the drag force acting on the car is measured. For a given car, the experimental data is generally represented by a single coefficient that is called drag coefficient. It is defined by the following relationship:
The frontal area A represents the frontal projection of the car's area and could be approximated simply by multiplying 0.85 times the width and the height of a rectangle that outlines the front of a car. This is the area that you see when you view the car from a direction normal to the front grill. The 0.85 factor is used to adjust for rounded corners, open space below the bumper, and so on. To give you some idea, typical drag coefficient values for sports cars are between 0.27 to 0.38 and for sedans are between 0.34 to 0.5.
The power requirement to overcome air resistance is computed by
where
P = Power (Watts or ft.lb/sec)
1 horse power (hp) = 550 ft.lb/sec
and
1 horse power (hp) = 746 Watts
The purpose of this exercise is to see how the power requirement changes with the
car speed and the air temperature. Determine the power requirement to overcome the air resistance for a car that has a listed drag coefficient of 0.4 and width of 74.4 inches and height of 57.4 inches. Vary the air speed in the range of 15 m/s < V < 35 m/s, and change the air density range of 1.11 kg/m^3 < p <1.29 kg/m^3. The given air density range corresponds to 0ºC to 45ºC. You may use the ideal gas law to relate the density of the air to its temperature. Present your findings in both kilowatts and horsepower. Discuss your findings in terms of power consumption as a function of speed and air temperature.
Define pitch as used in spring terminology.
What will be an ideal response?