A simple welding sequence used to reduce or eliminate distortion is to make short welds _____
a. on alternating sides of a joint
b. on the ends of a joint
c. on one side and long welds on the other side of a joint
d. in the middle and long welds on the ends of a joint
a
You might also like to view...
The primary advantage of installing wood shingles over open sheathing is _____
A) easy access from underneath to seal the gaps between shingles B) additional attic ventilation C) air can circulate under the shingles to prevent rot D) easy shingle replacement
Use PSpice to determine the mesh currents in circuit in Fig. 13.139. Take ? =1 rad/s. Use k = 0.5 when solving this problem.
 figure 1.png)
Firewire connectors can have the following number of pins except ________
A) 9 pins B) 12 pins C) 6 pins D) 4 pins
Find the armature current of a shunt motor with an armature resistance of 6 ohms and 120 volts applied. Then find the amount of torque produced if the motor has a Kt rating of 1 and a field flux of 2.
What will be an ideal response?