A system with a loose TEV sensing bulb would most likely:
A) Have a lower-than-normal evaporator pressure.
B) Have a high superheat.
C) Need adjusting to compensate for the poor bulb installation.
D) Have a low superheat.
D
You might also like to view...
Cold engines require more power to crank over and start than warm engines.
Answer the following statement true (T) or false (F)
What is fire-retardant-treated (FRT) wood?
What will be an ideal response?
Where high-value crops or individual ornamental shrubs are to be grown and water is expensive, the most efficient type of irrigation to use would be ________
A) drip or trickle B) basin flooding C) furrow D) center pivot
A 64-Mbyte SIMM is installed into a system but when a memory test is executed, the SIMM is detected as a 32-Mbyte device. What is a possible cause?
A) The memory module was not installed properly. B) The voltage on the memory module is incorrect. C) The address decoder on the SIMM is faulty. D) The most significant address line is stuck high or low.