In the turfgrass industry, ____________________ level means suitability for the intended use
Fill in the blank(s) with the appropriate word(s).
ANS: playability
You might also like to view...
What specification on the unit data plate should be used to size the power wire?
A) The rated load amps (RLA) B) The maximum overcurrent protection (MOCP) C) The locked rotor amps (LRA) D) The minimum circuit ampacity (MCA)
An insulated steam turbine is to produce 100 MW of power. Superheated steam enters the turbine at 12 MPa and 600°C, and saturated water exits the turbine at a pressure of 80 kPa. There are two design constraints to be considered:
(1) The turbine blade design requires that the quality of the steam to be no less than 0.90 to maintain blade durability. (2) The maximum mass flow rate of steam that the system can utilize is 100 kg/s. Plot the mass flow rate of steam necessary to produce 100 MW of power for exit qualities ranging from 0.9 to 1.0, and then determine the range of exit qualities that satisfy both design constraints. Determine the necessary mass flow rate of the steam. Given: P1 = 12.0 MPa; T1 = 600°C; W?=100 MW=100,000 kW; P2 = 80 kPa; Steam State 1 is the inlet, state 2 is the outlet. Assume: Q? = 0 (insulated) Also, for a turbine, assume steady-state, steady-flow, single-inlet, single-outlet flow, with ?KE = ?PE = 0
____________________ is when a fully charged battery continues to receive a charging current.
Fill in the blank(s) with the appropriate word(s).
The droppings of earthworms are called _____________________
Fill in the blank(s) with correct word