What do wiring diagrams show?
What will be an ideal response?
ANSWER: Wiring diagrams show a pictorial illustration of electrical components with connecting wires.
You might also like to view...
Compare and contrast the competing views of the North and the South concerning the Missouri Compromise. To what extent can the compromise be seen as a victory and a loss for both the North and the South. Which side do you think got the better deal? Justify your answer.
What will be an ideal response?
Al prolongar una escalera de extensión, jale de la cuerda hasta que la sección superior esté en la posición deseada y luego:
a. enganche bien el mecanismo de traba en el escalón deseado. b. use la traba para asegurar bien el largo de la escalera. c. use al menos dos abrazaderas para trabar la escalera en una posición estable. d. ate la cuerda a un escalón para trabar la escalera en el largo deseado.
The number of poles, combined with the alternating current frequency (HZ), determines the synchronous speed ____ per minute (RPM) of induction motors.
a. references b. resolution c. round d. revolutions
A distillation unit is to be used to generate pure water vapor. 2.0 kg/s of liquid water at 25oC enters the system, and 0.2 kg/s of saturated water vapor leaves through one port and 1.8 kg/s of saturated liquid leaves through a second port (along with impurities in the water which can be neglected in the analysis). The pressure throughout the whole system is 100 kPa. There is no work done in the process, and all energy is added through heat transfer. (a) Determine the rate of heat transfer needed to produce this flow of saturated water vapor. (b) Using your separation chamber model, plot the heat transfer rates needed to produce saturated water vapor flow rates between 0.1 kg/s and 1.0 kg/s (along with corresponding changes to the saturated liquid water exit flow rates).
State 1: Inlet stream; State 2: Saturated vapor exit stream; State 3: Saturated liquid exit. Given: P1 = P2 = P3 = 100 kPa; T1 = 20oC; x2 = 1.0; x3 = 0.0; m?1=2.0kgs; m?2=0.2kgs; m?3=1.80kgs Assume: W?=0 (given). Given no other information regarding the mixing chamber, make the following common assumptions: ?KE=?PE=0. We are told there is heat transfer. Also, assume the mixing chamber is a single-inlet, multiple-outlet, steady-state, steady-flow device. What will be an ideal response?